Product Information

Our NEW surface mount LED units for taillights and/or third brake lights. It is a two function light, (stop & run) and will work on any 12 volt electrical system -with or without a battery. Surface mount in two styles, clear lens short unit and red lens long strip light. Very light.





Item #: BL-CFILEDA
Price: ($19.99)

This is a molded adaptor designed to convert the taillight wiring harness on all Polaris CFI snowmobiles (2005-current) like the Dragon, anything that has the Clean Fire Injection fuel management, to make a LED taillight function properly. Will also work in Can-Am ATV's. The stock taillight wiring on the CFI models use a non-typical set-up with one positive and two ground wires. The Brite Lites CFI Adaptor will reroute the wiring so it is a standard one wire ground and tow wires positive (run & brake). the adaptor is built with a 3 pin molded plug like the stock wiring, so you just plug it in, and three wire out, to splice into the new LED. It will work on any 3 wire (2 function) LED, but is matched for our 4" strip LED. Sold per each.

Item #: BL-LEDTR
Color: Euro Clear Lens- w/Red LEDs
Price: ($19.99)

Clear Lens version is out of stock - only RED lens available.These are  LED units for universal fit to replace or add taillight to any 12 volt system. 6 LEDs are mounted with a clear lens to make it the most luminant LED bulb ever made. Rated life is 10,000 hours and draws virtually no electricity (about 15 milli-amps). Uses a small 3.86" x .71" flat surface footprint, and stands only .95" tall. The wire is a three wire configuration, one ground, a hot for run and a hot for brake circuits. LEDs are polarity sensitive so be sure to connect ground to ground or it will not light. The white wire is the ground, black wire is run, and red is stop. (you can't damage it if you wire incorrectly- it just won't light) Only 1.1 oz. sold per each light.

Item #: BL-TLED5R
Size: 5"
Color: Euro Clear w/red LEDs
Price: ($29.99)

8 LED's in a sealed light bar base for the stop/run taillight on the rear of any vehicle. Designed to fit as a custom taillight or add to give extra safety. 3 wire connection. Brightest and widest dispersion angle available. Molded in clear plastic lens, Red LEDs, sealed water tight, with black removable rubber base. Connect wires to ground, run circuit, and brake circuit, of if no brake needed and to use as auxuallary light, connect just the brake (the brighter) circuit for a center light on trailer, or marker light. Cool euro look and brilliant red light!! Uses a small 4.75" x 1.4" flat surface footprint, and stands only 1.1" tall. Mounting holes are 3.75" c to c and wires exit from center back. Sold per each light.

Item #: BL-TLEDA
Size: 4"
Color: Euro Clear w/Amber LEDs
Price: ($19.95)

6 LED's in a sealed light bar base for the run/turn forward or mid light on any vehicle. Designed to fit as a custom unit or add to give extra safety. 3 wire connection. Brightest and widest dispersion angle available. Molded in clear plastic lens, sealed water tight, with black removable rubber base. Connect wires to ground, run circuit, and turn circuit, of if no turn needed and to use as auxuallary light, connect just the turn(the brighter) circuit for a center light on trailer, or marker light. Cool euro look and brilliant amber light!! Sold per each light.

Item #: BL-TLEDR6
Size: 6"
Color: Euro Clear w/red LEDs
Price: ($29.99)

12 Super Bright LED's in a sealed light bar base for the stop/run taillight on the rear of any vehicle. Designed to fit as a custom taillight or add to give extra safety. 3 wire connection. Brightest and widest dispersion angle available. Molded in clear plastic lens, Red LEDs, sealed water tight, with chrome removable metal bezel. Connect wires to ground, run circuit, and brake circuit, of if no brake needed and to use as auxuallary light, connect just the brake (the brighter) circuit for a center light on trailer, or marker light. Cool euro look and brilliant red light!! Uses a small 6 3/16" x 1 7/8" flat surface footprint, and stands only 15/16" tall. Wires exit from center back. Sold per each light.

Item #: BL-TRLEDCR
Size: 13.5"
Color: Red
Price: ($39.95)

13 LED's in a sealed light bar base for the stop/turn/run lights on the rear center of enclosed trailers. Simple replacement of stock units or add to give extra safety. 3 wire connection. Brightest and widest dispersion angle available. Red plastic optical lens sealed to black semi ridged mounting base with two mounting points (snap over red covers to hide mounting holes). Many great uses on trailers as center brake light, the back of cycle racks, snomobile gas racks, snow flap, tunnel close-offs, golf carts, and more. The wire is a three wire configuration, one ground, a hot for run and a hot for brake circuits. LEDs are polarity sensitive so be sure to connect ground to ground or it will not light. The white wire is the ground, black wire is run, and red is stop. (you can't damage it if you wire incorrectly- it just won't light)